Advanced Lamp Technology

• Low pressure high-output lamp technology provides higher UV output for better disinfection in a system approximately half the size of conventional systems - saving space and making installation simpler

Unique Sizing System

• Allows you to select the unit based on flow rate, UV transmittance, and the UV dose required.
• Model F treats up to 56 US gpm / 212 lpm   (16 mJ/cm² at 95% UV transmittance)

User Interface

• Elapsed time meter tells you how long the lamp has been in service. A service reminder lets you know when the lamp needs to be changed
• Audio and visual alarms tell you if there is a problem with the operation of the unit
• The LED readout also provides a diagnostic output that tells the user what the source of the failure is
• An optional UV monitor continuously monitors the amount of UV making it through the water and notifies you if disinfection is not being assured

Lamp/Sleeve Combination

• Lamp and sleeve are removed without the use of any tools
• Lamp and sleeve remove from the reactor chamber as one piece ensuring you are aware of any build up of minerals on the sleeve that may interfere with the proper UV dose being delivered to the water

Auto-ranging Electronic Power Supply

• More energy efficient
• Withstands fluctuations in voltage that can cause low UV output and damage to the lamp
• Automatically adjusts to the input voltage and frequency to allow use of multiple global power grids

Optional Shut-off Valve and Remote Alarm

• Shut-off valve stops water flow when disinfection is not assured
• Remote alarm allows for notification of alarm conditions at a location remote from the system

Snap-on Safety Cap

• Prevents the harness from accidentally being disconnected
• Ensures that the lamp is disconnected before it is removed from the reactor chamber to prevent damage to eyes and skin from the UV light